-40 to 150C Linear temperature sensor with plug and play harness
The Autosport Labs Linear Temperature Sensor offers a linear response of 10mv/C for easy calibration with a simple conversion formula.
Only ground, 5v, and output connections are required, with no pullup resistor needed – similar to other active sensors. The sensor is suitable for fluids such as oil, coolant and water.
Provided with M8 plug and play harness connector.
- 1 Meter cable length
- 1/8″ NPT fitting
- Body: Stainless Steel
- 13mm (1/2″) hex head
- Voltage supply: 3-5V
- Pull-up resistor: None (Active element)
- Operational temperature range: -40 to 150C
- Calibration: Linear response 10mv/C; 0.5V at 0 degrees C
- M8 Pinout:
- Pin 4 : signal
- Pin 1: Ground
- Pin 3: 5V
- Wiring color codes:
- Green: Ground
- Red: 3-5V
- Yellow: Signal Output
Full Harness Specifications